top of page
Concrete Wall
Anchor plate
Anchor plate

Introduction (Foundation Repair)

When it comes to foundation stability, wall anchors are often touted as the go-to solution. But are they really necessary? Are they installed correctly when contractors sell them to homeowners? In this article, we'll explore more information about wall anchors and whether you actually need them to protect your home.


Understanding Wall Anchors

Before we dive into the necessity of wall anchors, let's first understand what they are. Wall anchors are typically installed to stabilize foundation walls that have been pushed laterally into the basement space by external forces causing a bulge. They consist of the following components:

  • An interior wall-formed steel plate with typically 2 ribs. Dimensions typically vary by the manufacturer, most commonly seen as 11 inches x 18 inches or 12" x 28 inches.

  • Flat plate washer, part of the interior wall assembly.

  • Threaded rod, typically 3/4" in diameter cold-rolled round bar, hot-dip galvanized.

  • Beveled washers and nuts on either side of the rod.

  • Threaded coupler to allow splicing of the threaded rod.

  • Exterior soil anchor, typically made from 2 formed hot-dip galvanized steel plates. The system is installed by inserting the steel rod through the wall into the outside and running it to the appropriate distance where a hole is dug out, and the exterior soil anchor is attached to the rod. Calculations must be performed based on the geotechnical data to provide spacing of the anchors, how far the rod needs to run away from the wall, and how deep the plate for the reinforcement should be considered acceptable.

Anchor plate system
Anchor plate system
Anchor plate system installed
Anchor plate system installed

The Problem with Unnecessary Wall Anchors

The installation of wall anchors can be an expensive endeavor, costing homeowners thousands of dollars. But what if the wall anchors aren't actually needed? Then you now have reinforcement in your basement, and every future potential buyer and likely lender will require its verification that it meets the engineering standards. Not to mention causing water to fill up the hollow, unreinforced concrete blocks due to creating an entry point at the holes drilled to run the threaded rod.

Water leaking behind washer of anchor plate
Water leaking behind washer of anchor plate

Misdiagnosed Cracks

One common reason for the unnecessary installation of wall anchors is misdiagnosed cracks. We have seen few incidents where the foundation repair salesman misdiagnosed the problem and end up selling the client either an unnecessary product or the wrong product.


Lack of Structural Significance

In many cases, minor movement of foundation walls does not pose a structural risk. Even if there is evidence of movement, it may not be necessary to intervene with wall anchors. The extent of movement and the absence of ongoing movement should be carefully evaluated by a licensed professional engineer before considering structural reinforcements.


The Cost of Unnecessary Wall Anchors

Aside from the potential lack of need for wall anchors, there are other factors to consider, such as the cost and the impact on the resale value of your home. Houses with visible wall anchors installed can be more difficult to sell, as buyers and, lately, some lenders may have reservations about them. It's essential to weigh the cost of installation against the actual need for wall anchors to avoid unnecessary expenses and potential complications in the future.


Signs That You May Need Wall Anchors

While it's important to be cautious about overselling wall anchors, there are situations where they may be necessary. Here are some signs that indicate you may need wall anchors for your foundation:


Visible Inward Displacement

If you notice visible inward displacement of your foundation walls, such as bowing or cracking, it's crucial to have a professional assessment. Significant displacement can compromise the structural integrity of your home and may require the installation of wall anchors or other approved products to stabilize the walls.


Ongoing Foundation Movement

If you observe ongoing movement or shifting of your foundation, it's essential to address the issue promptly by having an engineering assessment.


Professional Engineer Recommendation

When in doubt, it's always best to consult with a licensed Professional Engineer. They can assess the condition of your foundation and provide expert advice on whether any reinforcement type is necessary or if alternative solutions may be more suitable. Sometimes, alleviating the root cause may be sufficient to prevent further movement.


The Importance of Proper Installation

If wall anchors are deemed necessary for your foundation, it's crucial to ensure they are installed correctly. Unfortunately, many companies do not adhere to the requirements set forth by testing agencies, resulting in improper installations. Improperly installed wall anchors can be ineffective and may not provide the intended stability for your foundation.


To avoid such issues, it's recommended to choose a reputable company with a track record of proper installation and adherence to industry standards. Don't hesitate to ask for references and verify the qualifications and experience of the installation team. More importantly, always require the contracting firm to provide you with a stamped letter from a reputable, licensed, and local professional engineer approving the methods and certifying the installation.


Alternatives to Wall Anchors

In some cases, there may be alternative solutions to stabilize your foundation without the need for wall anchors. It's important to explore these options before committing to wall anchor installation. Here are a few alternatives to consider:


Carbon Fiber Straps

Carbon fiber straps can be an effective solution for stabilizing foundation walls. They are lightweight, extremely thin, durable, and can provide the necessary reinforcement without the need for extensive excavation, penetrating your wall with holes, or installing anchors. Carbon fiber straps are particularly useful for minor wall cracks and can be a cost-effective alternative to wall anchors.


Carbon Fiber Strap
Carbon Fiber Strap

Steel I-Beams/Tubes:

Installing Steel I-beams or other equivalent shapes such as tubes can be an alternative solution, so long reviewed, designed, and engineered also approved by the local municipality where you live.


Conclusion

In conclusion, the necessity of wall anchors for your foundation should not be taken for granted. It's important to carefully assess the condition of your foundation and seek professional advice from a licensed engineer. Avoid falling victim to unnecessary installations and overselling of wall anchors. Explore alternative solutions and choose a reputable company that adheres to industry standards. With the right approach, you can ensure the stability and longevity of your home without unnecessary expenses or complications.




Written by Firas Abdelahad, P.E.

Firas Abdelahad has been a practicing structural engineer since 2005, collaborating with a diverse range of professionals, including consultants, architects, investors, homeowners, contractors, and subcontractors. Together, they tackle the various challenges that can arise during the design and construction phases of projects.

Firas has reviewed, evaluated, and assessed thousands of properties across the state of Pennsylvania, spanning from State College to Erie and throughout Western PA.


The information and statements in this document are for information purposes only and do not comprise the professional advice of the author or create a professional relationship between reader and author.

 
 
 

Updated: Sep 17, 2024


Riser height measurement
Riser height measurement

Introduction (Expert witness services):

Structural engineers play a pivotal role in legal cases related to trip and fall incidents, construction damage, improperly structurally modified structures, and improperly reinforced foundations. As expert witnesses, their expertise is sought to provide a comprehensive understanding of the structural aspects involved in these situations. In this blog post, we explore the diverse responsibilities of structural engineers as they contribute their perspectives and analyses to achieve equitable and impartial resolutions in residential scenarios.


1. Trip and Fall Incidents:

In cases of trip and fall incidents, structural engineers examine the design and construction of walkways, stairs, and other structures to identify potential hazards. Their expertise allows them to assess whether the structural elements comply with safety standards and regulations. By analyzing factors like material integrity, load- bearing capacity, and adherence to building codes, structural engineers can determine if a structural flaw contributed to the accident.


2. Construction Damage:

When construction damage occurs in residential properties, structural engineers investigate the root causes. They assess the quality of materials used, construction methods employed, and adherence to approved plans. By identifying deviations from structural standards, engineers can provide crucial insights into whether the damage is a result of construction defects, poor workmanship, or other structural issues.


3. Improperly Structurally Modified Structures:

Homeowners often make modifications to their residences, such as removing walls or altering load-bearing elements, including party walls in row houses. Structural engineers can assess these modifications to determine if they adhere to engineering principles and local building codes. Unapproved changes can compromise structural integrity, leading to safety hazards. Expert witnesses assist the court in understanding the consequences of such alterations.


4. Improperly Reinforced Foundations:

Issues with foundations can jeopardize the stability of an entire structure. In cases involving improperly reinforced foundations, structural engineers examine the foundation’s design, materials used, and construction methods. They assess whether the foundation meets industry standards and if deficiencies contributed to structural problems. Expert witnesses play a crucial role in explaining technical details to legal professionals and the court.


5. Personal Injuries:

Personal injuries frequently occur as a consequence of facade or panel failures, whether attributed to shortcomings in design, installation, fabrication, or engineering. Our extensive experience spanning all aspects, from design and engineering to manufacturing and installation, equips us with a comprehensive understanding to effectively address such cases involving personal injuries.



Conclusion:

Collaborating with Pittsburgh Design & Engineering Services emphasizes the vital role of a structural engineer as an essential expert witness in both residential and commercial cases. Leveraging their profound expertise, the structural engineer adeptly analyzes intricate structural issues and effectively communicates their findings to legal professionals and the court. Through the provision of impartial and professional insights, these experts play a crucial part in advancing justice in various cases, including those involving trip and fall incidents, construction damage, personal injuries, improperly structurally modified structures, and inadequately reinforced foundations.



Written by Firas Abdelahad, P.E.

Firas Abdelahad has been a practicing structural engineer since 2005, collaborating with a diverse range of professionals, including consultants, architects, investors, homeowners, contractors, and subcontractors. Together, they tackle the various challenges that can arise during the design and construction phases of projects.

Firas has reviewed, evaluated, and assessed thousands of properties across the state of Pennsylvania, spanning from State College to Erie and throughout Western PA.


The information and statements in this document are for information purposes only and do not comprise the professional advice of the author or create a professional relationship between reader and author.

 
 
 
Expert Witness Services
Expert Witness Services

In the intricate world of legal proceedings, the right structural engineer expert witness can be a game-changer. At Pittsburgh Design & Engineering Services, we take immense pride in delivering expert witness services that stand out for their professionalism, accessibility, and unwavering commitment to excellence.


Our wealth of experience in structural evaluations has proven invaluable in aiding insurance companies and attorneys throughout disputes and litigation. We excel in accurately diagnosing structural issues, evaluating documents, and providing structural services that adhere to the highest standards of care in structural engineering.



Easy Collaboration and Cooperation

Our structural engineer is known for being easy to work with and highly cooperative. We understand the importance of a collaborative effort in legal cases.


Accessible and Ready

In the fast-paced legal environment, accessibility is key. We prioritize being readily available for consultations, promptly returning calls, and actively participating in the communication flow. Your urgency is our priority.


Honest, Ethical, and Uncompromising Standards

Integrity is woven into the fabric of our company. We approach every case with honesty, adhere to the highest ethical standards, and uphold an unwavering commitment to calling cases with the utmost integrity and objectivity.


Extensive Education and Proven Experience

Backed by a strong foundation in higher education and an extensive track record, our team brings a wealth of knowledge and years of in-depth experience. We navigate the complexities with confidence and precision.


Timely and Well-Prepared

We understand the importance of deadlines and thorough preparation. Our team is dedicated to meeting timelines while being meticulously prepared for depositions and trials, ensuring that we contribute effectively to the legal process.


Advocacy for Plaintiffs and Defendants

Versatility is our strength. We are proud to represent both plaintiffs and defendants, providing unbiased and objective expert opinions. Our commitment to impartiality underscores our dedication to the pursuit of justice.


Simplifying Complexity

Our team possesses a unique skill set in simplifying complex material. Being chosen as a dean teaching assistant during our graduate studies years ago bestowed invaluable experience, giving us the capability to convey teachings in a simplified manner. We excel at breaking down intricate details and effectively communicating them to fact finders or juries.


Passion for Excellence

At Pittsburgh Design & Engineering Services, our work is not just a job – it's a passion. Our genuine love for what we do fuels our commitment to excellence.

In conclusion, when you opt for Pittsburgh Design & Engineering Services for expert witness support, you are choosing a dedicated partner committed to professionalism, accessibility, integrity, and high level of expertise within our specialized realm of experience. Our involvement in design, evaluation, assessment, fabrication, and construction throughout the years has afforded us an extraordinary wealth of experience.



The information and statements in this document are for information purposes only and do not comprise the professional advice of the author or create a professional relationship between reader and author.

 
 
 

724-949-0004

412-677-0933

2600 Boyce Plaza Rd 2nd Floor

Pittsburgh PA 15241

  • Facebook
  • LinkedIn
  • Pittsburgh Structural Engineer- Instagram page
  • TikTok
  • Pittsburgh Structural Engineer- YouTube Channel

© 2019-2026  Pittsburgh Design & Engineering Services LLC. All Rights Reserved

bottom of page